LED lighting wide to acoustic panel

Dimmable led profile (led strip COB 15W/m IP20 3000K 1450lm RA90 24V)

Specially made to replace a bar . Includes 3 meters of cable.

NOTE! The customer is responsible for purchasing the transformer and control. The profile is preferably glued on site.

Guide for installing guide rails ( See installation guide ).

Guide for controlling joint strips https://www.xcen.se/guide-styrning-ledlister-till-wood-on-wall

A few assembly tips:

1. Aluminum profile can be cut to the desired length with a regular hacksaw.
2. The joint tape can be cut with scissors to the desired length at the markings every 5 cm.
3. If the cable is to be routed out the back, drill holes for the cable at the end of the back of the aluminum profile and route the cable to the back.
4. If the cable is to be routed out through the short side of the profile, make holes in the end piece with a drill and route the cable through the end piece.
5. When installing the duct tape, make sure that the tape adheres properly. Feel free to use extra glue to make the duct tape adhere well at the ends. Especially at the cable, as the cable can push up the duct tape during installation.